If the utility finds bad blocks on the media, it prompts you to reassign them so they are no longer used. Troubleshooting Troubleshooting Most problems can be resolved by following the recommendations in Problems and Solutions. Don’t have an account? Performing a secure erase takes up to six times longer than clearing or zeroing a disk drive. Error Messages PCI bus scan are not displayed. This section contains the following subsections:.
|Date Added:||25 August 2004|
|File Size:||39.45 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Page Glossary striping, disk; striped array Spreading data over multiple disks to enhance performance. Page 84 – Windows NT 4.
Dell 04cvf ADAPTEC Aha-2940u2w/dell3 Ultra2-lvd/se SCSI HostRAID Controller Card
Check the BIOS settings to verify the correct boot order. If you change this setting, Advanced See Chapter 21 for more information. You can identify disk drives by viewing the list of disk drives on your system. During the Rebuild process, you can stop the Rebuild by pressing Esc.
The following parameters are case-sensitive and must be entered exactly as shown. Driver Error Messages An error has occurred while the driver was setting up its internal data structures. This will execute a comparison of mirrored drives, a copy from the primary drive to secondary drive when miscompare occurs, and a report at the end of the verification process.
Instead, type q quit and press Enter. Procedures that are specific to a NetWare version are noted when necessary. If you are using a proxy server to access the Internet, you must bypass the proxy server to access the Adaptec Storage Manager Web server. Adaptec Customer Support If you have questions about installing or using your Adaptec product, check this document first—you will find answers to most of your questions here.
The Adaptec Ultra Family host adapters use the same driver; it is not necessary to install the driver again. If you use this option, the following options are available: Troubleshooting In Windows Nt 4.
Delivery options see all. The secure erase stops and the ACU returns to its main window.
– Adaptec Inc Adaptec SCSI HostRAID Controller Drivers
The section contains the conrroller subsections:. The adapters supported by the aic driver include: Performing a secure erase takes up to six times longer than clearing or zeroing a disk drive. Try installing the most up- to-date version of the driver available from the Adaptec Web site.
You can use the disk utilities tool to perform low-level formatting, or to verify your disk drives. When enabled, NCQ is enabled. Try installing the most up-to-date version of the driver available from the Adaptec Web site.
Updating Windows NT 4. This setting is for SAS address conflict resolution only and must otherwise remain at its default value. This file is self extracting and will unzip to the directory c: Select Controller Configuration from the main Select utility menu and change the settings listed in the following table.
This is normal behavior. This might suggest that the adapter resources for example, IRQ conflict with another board installed in your system. When disabledwrite cache is not used on the disk drive. Glossary striping, disk; striped array Spreading data over multiple disks to enhance performance. Page 7 Software is furnished howtraid be free from defects in material or workmanship under normal use and service for a period of thirty 30 days from the date of delivery to you.