September 15, 2020

A Printing Preferences dialog box appears. Printing Is Streaked Solution: Cleaning the DuraLabel Toro. If possible, plug in the battery charger and try turning the system on again; if the system works while plugged in, the battery needs to be recharged. If there are no jobs in the queue, reopen your label program and your label design, and try printing again.

Uploader: Arajora
Date Added: 19 August 2007
File Size: 37.61 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3040
Price: Free* [*Free Regsitration Required]

We are here to help.

DuraLabel PRO 300 User Manual

Then, access the printer controls:. Then, try printing your label once more. Check the Supply Loading Turn off the printer using the switch in the back, near the black power cord, and open the printer as if you were going to change all the supplies. I would like to receive emails to keep me safe! Hook it up to your P. If the cord is secure, turn the printer on again.

Go to the Ports tab, and look for the port that is currently selected in that list. Also clean the green guides in the lower part of the printer, where your label stock is fed through.

If no click is heard, remove the cartridge entirely, and make sure that there is no foreign material in the system or on the underside of the cartridge. Power was cycled too quickly.


If the battery has been allowed to charge, and the system is at a normal temperature, then the internal settings of the printer may need to be reset. Page 17 Align the label supply under the tape guide, fitting it in the dutalabel section and then pressing the tape guide into place. Find everything you need. Lobo is trying to save your label design onto an optional SD card, but the card is not being red properly duealabel may be missing.

For your day-to-day label projects. You will see a message in red noting that this is for DuraSuite only.

A Printing Preferences dialog box appears. You can also contact our support team for help.

DuraLabel Pro 200 Thermal Transfer Barcode Label Printer Making Dc24v 3.75a

This will open a window for the basic print settings. Cleaning duralabwl DuraLabel Catalyst. The light will turn off and then come back on again, going to solid green.

If there is already supply loaded, click on the printer icon in the taskbar at the top of the Toro home screen.

Get the item you ordered or get your money back. These are the advanced controls for your printer.


How to Clean DuraLabel Kodiak. The ribbon should roll down the back of the back roller, forward underneath the print head but above the black sensor bar, and onto the front of the front roller. Operate the manual cutter by pressing down firmly on the lighter-colored dyralabel.


I would like to receive emails to keep me pgo Page 42 Replace the cutting mechanism, inserting the tabs on the sides of the cutter, into the slots as shown below. Now enter the data for Column B, e. DuraLabel Ribbon and Vinyl Supplies have been optimized for compatibility and print quality.

DuraLabel PRO Information | Graphic Products

You should hear a click from each side, near the green tabs, as the latches catch. Move the adjustable label guides to hold the label supply in place. Save on Label Makers Trending price is based on prices over last 90 days.