|Date Added:||14 June 2008|
|File Size:||24.21 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Search the product to add.
Click the Services tab, and then click Align to print an alignment page. The Power light and the Cartridge light are on.
Wipe the rubber paper feed rollers with the damp cloth. All the lights are off The following light pattern displays on the product control panel:.
If the carriage is stuck on the left side of the productmove the carriage to the right side of the product. The Power light is on.
HP Deskjet CXI Standard Inkjet Printer | eBay
Allow the rollers to dry completely, and then reattach the rear access door or duplexer to the rear of the product. Do not remove jammed paper at this stage. Solution No action laseerjet necessary, as the product is ready to process a print job. Make sure the carriage can move freely Press the Power button to turn on the product. See your browser’s documentation for specific instructions.
If your product does not have a duplexer, laserjer the rear access door to the rear of the product.
Blinking Lights on the HP Deskjet 900 Printer Series
Solutions Follow these solutions to resolve the issue. Remove the duplexer to clean the paper rollers Press the Power button to turn off the product.
The Power light and the Resume light blink simultaneously The following light pattern displays on the product control panel:.
Follow these steps to remove and then reinstall the cartridges. Use one of the following methods to clear the jam from the rear of the product.
The Power light blinks. Wait for the print job to finish If the product is currently processing a print job, wait for the print job to finish. Service or replace your HP product if you completed all preceding steps.
HP DeskJet 970cxi
Reattach the duplexer to the rear of the product. If the product prints when plugged directly into a wall outlet, the power strip or surge protector might not be allowing enough voltage laserjft reach the product.
Plug the printer directly into a wall outlet Disconnect the power cord from the rear of the product. Make sure the duplexer snaps laseejet into place. Do not press the buttons on the ends of the duplexer when you reattach it. Clear the jam through the rear access door Press the Power button to turn off the product.
Make sure that the printer is plugged in Follow these steps to make sure that the power cord is connected to the product and to the electrical outlet.
Solved: Driver Deskjet cxi for Windows 7 Ultimate SP1 bit – HP Support Community –
If pieces of paper remain in the product, more paper jams can occur. Remove the cartridge Follow these steps to remove the black cartridge.
The yellow arrow points to the Tri-color Cartridge Problem icon. The Power light is on and the Cartridge light blinks The following light pattern displays on the product control panel:. Open the cover on the product, and then wait for the carriage to move to the center of the product.
With the product turned on, disconnect the power cord from the rear of the product. Solutions Try these solutions in the order presented to resolve the issue. Click Startthen Printers and Faxes. Remove the cartridge Follow these steps to remove the tri-color cartridge.